TM Polyfilm® Three (3) Room Decontamination Shower Unit
-
3 Room Poly Sheeting Decontamination Shower Unit
-
Easy to assemble, low-cost, disposable decontamination system
-
Kit is designed with a dirty room, a shower room, and a clean room
-
1 Dirty Room/ 1 Shower Room /1 Clean Room
-
Use with Pole Kit & Shower Head Assembly (both sold separately)
Safety Environmental Control, Inc.
7 Knowlton Street Marlborough, NH 03455
United States
18005434592
Safety Environmental Control of Massachusetts, Inc.
183 Ferry Road Unit A-C Haverhill, MA 01835
United States
8669903101
Safety Environmental Control of California, Inc.
1480 Whipple Road Union City, CA 94587
United States
8003448910
TM Polyfilm's De-Con-Taminators is an easy to assemble, low-cost, disposable decontamination system. Kit is designed with a dirty room, a shower room, and a clean room. Shower head and pole kits sold separately for easy assembly. Dispose of all plastic sheeting in approved manner after use. Save pole and shower head for future use.
Actual Size:
- Per Room: 31" x 36 1/2" x 77 1/2"
- Assembled: 30" x 108" x 81"
Assembly time:
- Approximately 15 minutes for two (2) people.
Assembly Directions:
- All three (3) units are assembled in the same basic manner with a few special instructions to follow. (Note: After cutting the strap free hold the unit at the top while lifting it).
- While holding up the top of the unit, insert one pole in each corner. Bow the poles while inserting. In the shower unit, the poles fit around the floor grate.
- The shower unit has a shower head fastener on either side of the top inside frame. Attach the shower head assembly in either hole. One shower pole is equipped to attach a drain pump.
- After all three (3) rooms have been assembled, tape the units together at the top and bottom to provide a continuous decontamination system.
| Brands | TM Polyfilm |
|---|---|
| Material | Poly |
