8 oz. Fiberlock ABC FiberSpray (12 PK)

In stock
SKU
6410
  • Provides a convenient means for applying Fiberlock Technologies’ time proven ABC Asbestos Binding Compound asbestos encapsulant
  • Encapsulation of small, hard-to-access areas can be accomplished quickly and easily, without the need for bulky spray equipment

  • CFC-free “airless-spray” technology minimizes asbestos fiber release, and permits application of encapsulant in any position, even upside down (ideal for use inside glove bags)

 

Available Stores

Safety Environmental Control, Inc.

7 Knowlton Street Marlborough, NH 03455

United States

18005434592

$219.95
  • Provides a convenient means for applying Fiberlock Technologies’ time proven ABC Asbestos Binding Compound asbestos encapsulant
  • Encapsulation of small, hard-to-access areas can be accomplished quickly and easily, without the need for bulky spray equipment

  • CFC-free “airless-spray” technology minimizes asbestos fiber release, and permits application of encapsulant in any position, even upside down (ideal for use inside glove bags)

 

Fiberlock Technologies ABC FiberSpray is a convenient means for applying Fiberlock Technologies’ time proven ABC Asbestos Binding Compound asbestos encapsulant. ABC FiberSpray dispenses encapsulant from a unique 8 ounce “airless-spray” can. This CFC-free “airless-spray” technology minimizes asbestos fiber release, and permits application of encapsulant in any position, even upside down (ideal for use inside glove bags). The ABC encapsulant inside each can was found to meet U.S. Environmental Protection Agency (EPA) test requirements performed at Battelle Laboratories Under Government Contract# 68-03-2552-T2005. Encapsulation of small, hard-to-access areas can be accomplished quickly and easily, without the need for bulky spray equipment.

APPLICATION INFORMATION

  • PREPARATION.  Shake well before spaying. If nozzle orifice is clogged, remove the dried film from the cap or replace with an extra nozzle (provided upon request).
  • APPLICATION.  Apply ABC FiberSpray by spraying the surface from a distance of 8 to 12 inches. 
    • ENCAPSULATION: Use ABC FiberSpray to effectively encapsulate small areas of asbestos containing material (ACM)
    • GLOVEBAG USE: Place ABC FiberSpray in the pouch within the glovebag. Apply ABC FiberSpray to seal the friable pipe insulation ends after the insulation has been removed. Use ABC FiberSpray to “lockdown” residual microscopic fibers to the substrate
    • BULK SAMPLE REPAIR: Apply ABC FiberSpray to friable areas after bulk samples have been removed from the ACM or suspected ACM
  • CLEANUP.  Clean the nozzle with warm soapy water before the coating dries

SPECIFICATIONS

Package Size: 8 Ounce Cans (12 Cans/Case) | Solids by Weight ± 2%: 51.4% | Solids by Volume ± 2%: 44.0%| Viscosity at 70°F: 60-75 Kreb units | Flash Point: Non-Combustible | Specular Gloss: 82º ± 5 @ 60º | Shelf-Life: 36 Months Min. (Original Sealed Container) | Calculated VOC: 64 Grams/liter.

More Information
Custom Stock Status Usually ships in 1-3 days
UOM Dimension Inches 14x14x14
Write Your Own Review
You're reviewing:8 oz. Fiberlock ABC FiberSpray (12 PK)
Your Rating
© 2020, Safety Environmental Control, Inc. All Rights Reserved.